Re: [Forum] PciID for videokort

From: Svend Erik Venstrup <venstrup@mail1.stofanet.dk>
Date: Sun Oct 27 2002 - 21:13:22 CET

Henrik Brix Andersen wrote:

> On Thu, 2002-10-24 at 22:48, Svend Erik Venstrup wrote:
> > Naar jeg bruger lspci
>
> Version...?

lsmod version 2.4.15

>
>
> > Faar kortet: Trio32/64v nr: PCI-00:13:0
> >
> > Naar kortet autodetectes af "scanpci" , et vaerktoj som
> > folger med XFree86.
>
> XFree86 version...?

Det fremgaard af XF86config filerne

> > fra: /var/log/XFree86.0.log
> >
> > (--) PCI:*(0:19:0) S3 Trio32/64 rev84 Mem @
> > 0xf0000000/26
> >
> > senere i
> >
> > (II) Primary Device is: PCI 00:13:0
> > (WW) SAVAGE: No matching Device section for instance (BusID
> > PCI:019:0) found
> > (EE) No device detected.
>
> Hvordan ser din XF86Config fil ud? Især: hvad står der under 'section
> "Device"'?

Der er vedhaeftet XF86Config samt XF86config-4

  Hvad er det for et grafikkort? Producent? Model?

Producent: S3
Model: Trio32/64 rev84

>
>
> Det hjælper at sende flere oplysninger. Ting som versionsnumre, hardware
> type osv er uundværlige ved debugging.

Et sporgsmaal mere hvorledes kan debconf slaaes fra, saaledes det er muligt
at bruge
XF86Setup, som jeg har installeret paa maskinen. Jeg synes den er nemmere
at bruge.

--
Hilsen svend
(-;>/

### BEGIN DEBCONF SECTION
# XF86Config (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-v3 manual page.
# (Type "man XF86Config-v3" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
# dpkg-reconfigure xserver-s3
# as root. Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config file?" in /usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
        FontPath "unix/:7100" # local font server
        # if the local font server has problems, we can fall back on these
        FontPath "/usr/lib/X11/fonts/misc"
        FontPath "/usr/lib/X11/fonts/cyrillic"
        FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
        FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
        FontPath "/usr/lib/X11/fonts/Type1"
        FontPath "/usr/lib/X11/fonts/CID"
        FontPath "/usr/lib/X11/fonts/Speedo"
        FontPath "/usr/lib/X11/fonts/100dpi"
        FontPath "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
        Load "pex5.so"
EndSection

Section "Keyboard"
        Protocol "Standard"
        XkbRules "xfree86"
        XkbModel "pc104"
        XkbLayout "dk"
        XkbVariant "dk"
        XkbOptions "dk-latin1"
EndSection

Section "Pointer"
        Device "/dev/psaux"
        Protocol "NetScrollPS/2"
        ZAxisMapping 4 5
EndSection

Section "Monitor"
        Identifier "visa-lr8522 visa-lr8522"
        VendorName "visa-lr8522"
        ModelName "visa-lr8522"
        HorizSync 31-36
        VertRefresh 56-87
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync

# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync

# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync

# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync

# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync

# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync

# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync

# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync

# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync

# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync

# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync

# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync

# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace

# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync

# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync

# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync

# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync

# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync

# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync

# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync

# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync

# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync

# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync

# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync

# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync

# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync

# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync

# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync

# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync

# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync

# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync

# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync

# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync

# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
EndSection

Section "Device"
        Identifier "S3 trio32/64"
        VendorName "S3"
        BoardName "trio32/64"
        VideoRam 2
EndSection

Section "Screen"
        Driver "Accel"
        Device "S3 trio32/64"
        Monitor "visa-lr8522 visa-lr8522"
        DefaultColorDepth 15
        SubSection "Display"
                Depth 8
                Modes "640x480"
        EndSubSection
        SubSection "Display"
                Depth 15
                Modes "640x480"
        EndSubSection
        SubSection "Display"
                Depth 16
                Modes "640x480"
        EndSubSection
        SubSection "Display"
                Depth 24
                Modes "640x480"
        EndSubSection
        SubSection "Display"
                Depth 32
                Modes "640x480"
        EndSubSection
EndSection

Section "Screen"
        Driver "FBDev"
        Monitor "visa-lr8522 visa-lr8522"
        DefaultColorDepth 15
        SubSection "Display"
                Depth 8
                Modes "default"
        EndSubSection
        SubSection "Display"
                Depth 15
                Modes "default"
        EndSubSection
        SubSection "Display"
                Depth 16
                Modes "default"
        EndSubSection
        SubSection "Display"
                Depth 24
                Modes "default"
        EndSubSection
        SubSection "Display"
                Depth 32
                Modes "default"
        EndSubSection
EndSection

Section "Screen"
        Driver "SVGA"
        Device "S3 trio32/64"
        Monitor "visa-lr8522 visa-lr8522"
        DefaultColorDepth 15
        SubSection "Display"
                Depth 8
                Modes "640x480"
        EndSubSection
        SubSection "Display"
                Depth 15
                Modes "640x480"
        EndSubSection
        SubSection "Display"
                Depth 16
                Modes "640x480"
        EndSubSection
        SubSection "Display"
                Depth 24
                Modes "640x480"
        EndSubSection
        SubSection "Display"
                Depth 32
                Modes "640x480"
        EndSubSection
EndSection

Section "Screen"
        Driver "Mono"
        Monitor "visa-lr8522 visa-lr8522"
        SubSection "Display"
        EndSubSection
EndSection

Section "Screen"
        Driver "VGA2"
        Monitor "visa-lr8522 visa-lr8522"
        SubSection "Display"
        EndSubSection
EndSection

Section "Screen"
        Driver "VGA16"
        Monitor "visa-lr8522 visa-lr8522"
        SubSection "Display"
        EndSubSection
EndSection

### END DEBCONF SECTION

### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
# dpkg-reconfigure xserver-xfree86
# as root. Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
        FontPath "unix/:7100" # local font server
        # if the local font server has problems, we can fall back on these
        FontPath "/usr/lib/X11/fonts/misc"
        FontPath "/usr/lib/X11/fonts/cyrillic"
        FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
        FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
        FontPath "/usr/lib/X11/fonts/Type1"
        FontPath "/usr/lib/X11/fonts/Speedo"
        FontPath "/usr/lib/X11/fonts/100dpi"
        FontPath "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
        Load "GLcore"
        Load "bitmap"
        Load "dbe"
        Load "ddc"
        Load "dri"
        Load "extmod"
        Load "freetype"
        Load "glx"
        Load "int10"
        Load "pex5"
        Load "record"
        Load "speedo"
        Load "type1"
        Load "vbe"
        Load "xie"
EndSection

Section "InputDevice"
        Identifier "Generic Keyboard"
        Driver "keyboard"
        Option "CoreKeyboard"
        Option "XkbRules" "xfree86"
        Option "XkbModel" "pc104"
        Option "XkbLayout" "dk"
        Option "XkbVariant" "dk"
        Option "XkbOptions" "dk"
EndSection

Section "InputDevice"
        Identifier "Configured Mouse"
        Driver "mouse"
        Option "CorePointer"
        Option "Device" "/dev/psaux"
        Option "Protocol" "MouseManPlusPS/2"
        Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
        Identifier "Generic Mouse"
        Driver "mouse"
        Option "SendCoreEvents" "true"
        Option "Device" "/dev/input/mice"
        Option "Protocol" "ImPS/2"
        Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
        Identifier "S3 Trio32/64v"
        Driver "s3virge"
        BusID "PCI:0:19:0"
        VideoRam 2
        Option "UseFBDev" "true"
EndSection

Section "Monitor"
        Identifier "visa-lr8522"
        HorizSync 31-36
        VertRefresh 56-87
        Option "DPMS"
EndSection

Section "Screen"
        Identifier "Default Screen"
        Device "S3 Trio32/64v"
        Monitor "visa-lr8522"
        DefaultDepth 16
        SubSection "Display"
                Depth 1
                Modes "640x480"
        EndSubSection
        SubSection "Display"
                Depth 4
                Modes "640x480"
        EndSubSection
        SubSection "Display"
                Depth 8
                Modes "640x480"
        EndSubSection
        SubSection "Display"
                Depth 15
                Modes "640x480"
        EndSubSection
        SubSection "Display"
                Depth 16
                Modes "640x480"
        EndSubSection
        SubSection "Display"
                Depth 24
                Modes "640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier "Default Layout"
        Screen "Default Screen"
        InputDevice "Generic Keyboard"
        InputDevice "Configured Mouse"
        InputDevice "Generic Mouse"
EndSection

Section "DRI"
        Mode 0666
EndSection

### END DEBCONF SECTION
Received on Sun Oct 27 21:03:13 2002

This archive was generated by hypermail 2.1.8 : Tue Jul 19 2005 - 16:04:22 CEST